It is not strange to discover that water has found its way into your subwoofers. Many people experience this, so do not be alarmed. There are many ways to solve this problem, and this article will surely help you with this.

Another thing this article will surely do is clear the air about any other questions you might have about waterproof powered subwoofers or a line-out converter for subwoofers. Ensure you read this article to the end to get much more than you came here for.

Do Wet Speakers Produce Less Quality Sound?

When speaker cones get wet (it happens a lot, so relax), their weight increases, making them slower. However, this does not cause a major weight difference as the cone, after getting wet, does not possess enough weight that makes it the same mass as the metal cone. However, the weight will subtly affect sound quality.

The more weight the cone has, the longer the delay between signals traveling through the voice coil. This reduces the sound’s dynamism. The sound coming through a wet speaker comes out muffled, and each component of the tune is unclear.

However, once the cone is completely dried, the original weight is restored, and the music quality comes back to normal.

But then, there are almost always repercussions. When the paper cone dries up, that process could alter its hardness. This reduces sound and music quality, especially the clarity of vocals and voices.

This becomes much more unpleasant after the paper cone splits when drying. It will not take a sound engineer to notice the difference at this point. The sound produced by damaged cones is not pleasurable at all.

Can Subwoofers Get Damaged by Water?

While the previous section answers this question, there is more to this than previously explained. You will learn more about it in this section. Along with supplying the answer to this, you will also learn the potential problems that could arise from exposing subwoofers to moisture.

To answer the question, yes, subwoofers can be damaged by water. After all, enclosures in subwoofers are usually made of fiberboards, and subwoofer cones are made of paper. Hence, it becomes straightforward for water and other liquids to get into the subwoofer and damage the terminals, the line out converter for subwoofer, and other components made of metal.

Below are the various problems that could arise as a result of subwoofers getting wet:

• The disintegration of the subwoofer enclosure
• The subwoofer cones (made of paper) get prone to damage.
• The metal components in the subwoofer begin to rust.
• The active amplifiers in the subwoofer will get destroyed

Some Tips to Protect Your Subwoofer from Moisture and Water

Below are a few suggestions on how to prevent your subwoofer from getting damaged by moisture:

• Fiberglass is a lifesaver when it comes to protecting anything against water. When the inner parts are covered with fiberglass, water cannot get through to the inner workings, such as amplifiers and other metal components. It is one good way to protect the speaker as a whole.
• Rather than spend on protecting your subwoofer box with fiberglass, you could get a waterproof powered subwoofer. Also known as outdoor or marine subwoofers, these devices are designed to keep the elements out. They resist water automatically – you could even dunk them in water if you wanted to.

Conclusion

If you’re not using a waterproof powered subwoofer, using your subwoofer in a location close to water (like a beach) is not a good idea. There are just too many things that could go wrong.

Most subwoofers are not waterproof. Waterproof subwoofers are more expensive. If you plan to use a line-out converter for the subwoofer, then you should not be found near water at all.

If you are looking to get line-out converters for subwoofers and waterproof subwoofers, Recoil Audio is just the place for that. We offer good products and services and competitive prices. See you soon!